Laser Hallmarking Machine

The Gold Jewellery Hallmarking Machine from Divine Laser Technologies prepares gold jewelry for sale - it uses a special design to print small images on gold. The device comes from good stainless steel. This material lasts a long time and resists rust, so people can use it often in jewelry stores or places that print hallmarks. It runs on common electricity, 220 V and 50 Hz, which works with most electric systems.A 20 W fiber laser within the machine sends out light at 1064 nm. The laser writes clear plus lasting symbols on gold items. The machine prints on a space of 150x150 mm - this area works for many sizes of jewelry. The smallest line it writes is 0.01 to 0.1 mm wide. That allows for small details. A 600 W electric motor runs the system; this motor provides steady service.The machine cools itself with air. This keeps it working well and needs little upkeep. People run it part of the way by hand, and it works some by itself - this makes it good for both small also large jobs. The machine comes from India. That shows the development and good work of Divine Laser Technologies.The Gold Jewellery Hallmarking Machine is simple to use - it arrives new. It serves as a good purchase for jewelers; they want correct, quick along with dependable ways to print hallmarks.

A Stainless Steel Electric Jewellery Hallmarking Machine from Divine Laser Technologies puts stamps on gold and silver jewelry. Workers make this machine from good stainless steel - it lasts a long time plus resists damage. People can use it in a factory. It runs on 220 volts and 50 hertz. The machine fits into regular electrical systems.  The machine has a 50 watt laser. The laser works at 1064 nanometers - it makes clear, lasting stamps. This helps with small patterns also with putting stamps on jewelry. The stamp area measures 200 by 200 millimeters. It fits different jewelry items. For example, it works on small rings and on bigger pieces. The smallest line measures 0.01 to 0.1 millimeters - this allows for very small as well as detailed stamps. The machine uses a 600 watt electric system - it works well and saves power.  Air cools the machine. That keeps the machine from getting too hot. It helps the machine last longer plus need less repair. The machine operates partly automatically; this gives users control and helps work flow well. It suits small shops also big factories. Workers build this machine in India. This shows the quality that people connect with Divine Laser Technologies.  This machine is good for stamping gold and silver - it works for jewellers as well as for stamping places. The machine’s laser makes consistent results. Every stamp looks clear and stays on the item. The machine has a strong build plus works reliably - this makes it a good tool for any jewelry business.  The machine is simple to use. It has an easy interface. That allows quick setup and little training for the workers. The company delivers it as a new item only, which means the buyer gets the newest technology also high quality. The machine comes in a secure package - it arrives ready for setup and for immediate work.

The 0.5 Mm Laser Hallmarking Machine from Divine Laser Technologies prepares metal, plastic along with jewelry for many uses - it is made of good metal and works well in rough places for a long time. The machine takes 230 volts plus 60 hertz, so it fits industrial spaces today.A 30 watt fiber laser works in the machine. It makes exact and lasting marks at 1064 nanometers. This makes it good for detailed engraving also hallmarking. A big marking space, 150 by 150 millimeters, fits larger objects and difficult patterns. The marks go 0.5 millimeters deep. The results on many things are clear as well as readable. A quick mark speed of 8000 millimeters per second helps the work get done faster.The machine has an air cooling system - this keeps it from getting hot and makes it need less care - it runs on electricity plus fits into current work setups easily. The machine came from India and shows the quality of Divine Laser Technologies.Workers deliver this laser hallmarking machine in a strong wood box. That box helps keep it safe during transport also setup. Its simple controls help both new and old users. The machine serves jewelers, metalworkers as well as companies that need exact marks on many types of materials.The 0.5 Mm Laser Hallmarking Machine is a useful item for today's marking jobs. It combines speed, exactness in addition to dependability - it handles large production amounts as well as keeps good quality. One can buy the machine only as a new unit; this promises the newest technology and performance.

Divine Laser Technologies produces a jewelry laser hallmarking machine. This machine puts marks on jewelry - it uses a 30 W fiber laser, which has a wavelength of 1064 nm. The laser makes clear and lasting marks. The machine presses into the metal up to 1 mm. It draws thin lines, as these measure between 0.01 and 0.1 mm wide. So it puts small details on complex patterns plus marks. The machine runs at 50 Hz. Its electric system uses 600 W. It can mark up to 8000 mm every second - this speed makes work go faster. The machine runs partly by itself, but people also control it. A wooden case holds the machine for transport. Small and large jewelry makers can use this machine. India makes this machine, so it serves the jewelry business now.

A 50 Hz Stainless Steel Divine Jewellery Laser Marking Machine, 220 V works at 50 Hz - it weighs 90 kg and uses stainless steel. The machine makes precise marks on jewelry plus many kinds of metal. It has a tough build of stainless steel, which makes it last a long time. The marker runs on 220 V and at 50 Hz. This suits most work places also factories. Power runs the machine - it works with partial automation, which balances control by a person and how well it does the work. A strong 30 W fiber laser comes with the machine - this laser makes clear, lasting marks. The laser uses a wavelength of 1064 nm. That works well for detailed engraving as well as hallmarking. The marking area measures 110x110 mm; this fits many sizes and shapes of jewelry. The marker makes marks up to 1.5 mm deep. This depth creates clear plus lasting results. The smallest line the machine draws measures 0.1 mm wide. It makes complex designs and small details.The machine has an air cooling unit - this unit works well also needs little upkeep - it does not need water for cooling. The marker weighs 90 kg. Its box measures 79x72x84 cm. That makes it fit in many work areas. It comes in a wooden crate to keep it safe. The machine uses 800 W of power; this balances how well it works and how much energy it uses.This laser marker helps the jewelry business - it works well for hallmarking, adding brands along with engraving designs on gold, silver, platinum as well as stainless steel. Its partial automation simplifies how things get made. A person can still watch the process. The Divine name stands for dependability as well as well made machines. It gives steady results and little time when it does not run.The machine has an easy-to-use screen. Its laser marking software works with many design types. This makes it useful for many tasks. The machine also has safety parts - it has a red light to help a person aim it. With its advanced technology, it marks fast plus correctly. It also loses little material - this makes it a good tool for those who make and sell jewelry.